company logo
home/products - about - contact

Wall clocks by Aptilite

Aptilite makes 3D printed wall clocks from PLA plastic which is compostable. They should be kept away from heat and flame and are not dishwasher safe. The clocks are roughly 5 to 8 inches in diameter and are available in a variety of different colors.

Our wall clocks have been made using an unconventional and time consuming process. The instructions used by the 3D printer have all been mathematically generated using trigonometry, geometry, and algebra in a spreadsheet and are made from one continuous bead of extruded plastic whose shape is determined by the formulas in the spreadsheet. Because they don't use standard CAD/Slicer technology, these clocks will surprise anyone familiar with 3D printing.

The availability of colors depends on the filament we can purchase. The marketplace for 3D printing supplies is very dynamic and our ability to get additional product in a particular color is sometimes limited.

Figure Eight: Twelve figure eights in an overlapping pattern.

Figure eight Figure eight Figure eight
Figure eight Figure eight Figure eight

Fishes: Four Fishes in an overlapping pattern.

Fishes Fishes Fishes
Fishes Fishes Fishes

Please contact us if you have any questions. We're very excited by the seemingly limitless design possibilities and would be happy to discuss other shapes.


home/products - about - contact


Copyright 2010-2016 Aptilite LLC. All rights reserved. Information in this document is subject to change without notice, and all guesses as to brightness and power consumption are very approximate. Trademarks of the products of other manufacturers are the property of those manufacturers.